51-60 cavity connectors appear on commercial vehicle body controllers, battery management harnesses and test benches. Many buyers in this range need the housing, the full terminal set and spare cavity plugs in one kit so a single harness can be repaired without a second order.
Tecosmos supplies this cavity range as complete connector sets: housing, crimp terminals and, for sealed versions, wire seals and cavity plugs. Ordering the set means the terminal, seal and housing are already matched, which removes the most common cause of water ingress and loose terminals in a repair harness.
Housings are moulded in glass-fibre reinforced PA66, terminals are tinned copper with a locking lance, and each batch is checked for cavity alignment, terminal retention and latch strength before packing. Sealed connectors carry a matte seal on the interface and single-wire seals at the back; unsealed types use a locking latch with optional terminal position assurance.
To quote quickly we need four details: the number of cavities, the terminal series (1.0 mm, 1.5 mm, 2.3 mm or 2.8 mm), the wire gauge and the vehicle or module the harness belongs to. If the OEM number on the housing is unreadable, send a photo of the old connector with the latch and the terminal side visible.
If your cavity count is still open, compare it with the neighbouring categories in the sidebar: the same housing family often exists in several pin counts, and picking the closest stocked size usually shortens lead time.